Whittier Wood Furniture 678W2a Instructions De Montage página 5

F x3
Fig. 5
F
F F
L
5. Lay the Seat (L) face down on a clean, protected surface (such as a table) with the notched
corners of the seat turned towards the edge of the table. Center the chair assembly on the Seat (L)
and fit the back legs into the notches of the seat. Using the pocket-drilled holes in the front and side
aprons as guides, fasten in place with three #8x1-3/16" Pan Head Screws (F). See Figure 5.
E
Fig. 6
E x 6
E
E
Fig. 6a
E
E
E
E
6. Glue six Wood Buttons (E) into the exposed holes. See Figures 6 and 6a.
Page 5 — 678W2a — 03/10