General Information - WIKA SA-11 Manual De Instrucciones

1. General information

1. General information
The pressure transmitter described in these operating instructions has been designed and manufactured using
■
EN
state-of-the-art technology. All components are subject to stringent quality and environmental criteria during produc-
tion. Our management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the instrument. Working safely requires that
■
all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety regulations for the instrument's range
■
of use.
The operating instructions are part of the product and must be kept in the immediate vicinity of the instrument and
■
readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions prior to beginning any work.
■
The manufacturer's liability is void in the case of any damage caused by using the product contrary to its intended
■
use, non-compliance with these operating instructions, assignment of insufficiently qualified skilled personnel or
unauthorised modifications to the instrument.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:
4
www.wika.de / www.wika.com
PE 81.80
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
info@wika.de
WIKA operating instructions pressure transmitter, model SA-11