Stinger CS150 Manual Del Propietário página 6

www.stingerworld.com
IMPORTANT INFORMATION
OPERATION OF THE TOOL
• Never inspect, maintain, repair, adjust, clear a jam or store the tool with the air connected.
• Never use the tool in proximity of flammable gases or liquids, as some tools will create sparks
that can be an ignition source for a fire or explosion.
• Always inspect the safety device for damage and proper operation prior to operation.
• Never assume the tool is empty of fasteners.
• Never point the tool toward yourself or any other persons.
• Never cycle the tool unless it is in contact with the work-piece.
• Never use the tool as a hammer or wedging device or drop to the floor from any height.
• Always remove your finger from the trigger when pausing from cycling.
• Never tamper with the safety device or use the tool if the safety device is not functioning
properly.
• Use only 7/8", 1 ¼" or 1 ½" STINGER StaplePac
Cap Stapler. Never use any fasteners that are not specified for use in this tool. The CS150
holds 1 coil of plastic caps (200 caps) and 2 strips of staples (100 staples each).
cap fasteners with the STINGER CS150
®
4