Fault Conditions; Maintenance By The User - Enraf Nonius Curapuls 970 Manual De Uso

After switching on the Curapuls 970, the
intensity display and indicator lamp for
tuning does not light.
Check that there is power to the wall socket.
Indicator lamp for tuning does not go out,
but intensity display lights.
Check electrodes and cables, and their connec-
tions.
Intensity display does not light, but indicator
lamp for tuning lights.
Check that the automatic cut-out is in position '
22

FAULT CONDITIONS

¤
'.

MAINTENANCE BY THE USER

General
Before cleaning and other maintenance of the
Curapuls 970, the unit must first be switched off,
and disconnected from the mains supply.
Opening of the equipment and attempts at repair by
unauthorized persons can adversely affect the safety
and are therefore not permitted.
Apparatus
The apparatus may be cleaned with a damp cloth
using a non-abrasive, liquid household cleanser.
Also the electrode cables, electrode arms, plate
electrodes and induction electrodes may be cleaned
in a similar way.
Flexible rubber electrodes
Clean the flexible rubber electrodes, preferably
daily, with normal lukewarm water. If necessary, a
household soap may be used. To avoid corrosion of
the cable junction, do not completely submerge the
electrodes. Avoid contact of electrodes with grease
or oil.
Before using the flexible rubber electrodes after
cleaning, make sure that both surfaces are fully
dry.
The electrodes may be disinfected with a cloth damp-
ened with 70% alcohol. Be aware that the black of
the rubber pad electrodes may stain.
Electrode cables
Check all cables and electrodes regularly for dam-
age (e.g. minute cracks) and bad contacts. Please
realize that any poor contact might cause a local
overheating effect. Pay special attention to pos-
sible cracks in the insulation of the cables. Always
replace damaged cables or electrodes immediately.
We advise keeping an extra set of frequently used
accessories in stock.
End life span apparatus and accessories
Your Curapuls 970 and accessories contains mate-
rials which can be recycled and/or are noxious for
the environment. At the end of the duration of life,
specialised concerns can take apart these articles
and sort out the noxious materials and materials
for recycling. By doing so you contribute to a better
environment.
Please ensure that you are well informed of the
local rules and regulations regarding to the re-
moval of apparatus and accessories.