Manual Programme; Use - N8WERK ST5403T-GS Manual Del Usuario

The arrow on the Programmes display (12)
indicates which programme has been
selected.
With the preset programmes, the baking
time is set automatically. It starts to count
down as soon as mixture has been poured
into the baking moulds. You will hear six
beeps at the end of the baking time.

MANUAL PROGRAMME

The device also has a manual Custom pro-
gramme. Instead of the preset baking time,
the Baking time display indicates how long
the mixture has been in the device since it
was poured into the baking moulds.
To end the programme, the device needs to
be switched off via the POWER button (8).

Please bear in mind: In the man-
ual programme, you will not hear
a beep indicating the end of the
baking time. The baking process
must be actively monitored.
LEVEL OF BROWNING
The level of browning you want can be
chosen using the control dial (11). The
device has 7 different levels of brown-
ing (10) which are shown as a bar on the
display (4).
PREHEATING
The device automatically preheats fi rst on
each programme, which is indicated by
the Level of browning display (10) fl ashing.
The device has only reached the desired
temperature for the selected programme
once you hear a beep and the display is lit
up constantly.
After the end of a baking programme, the
device automatically carries on heating so
that the next portion can be made straight
away.

If the level of browning is increased
between two baking processes,
bear in mind that the device will
need to preheat for longer. It is es-
sential to wait until the device has
reached the correct temperature.
CONSISTENCY
As well as the level of browning, the
consistency of the waffl es can also be
adjusted. You can use the CRISP EXTERI-
OR MOIST INTERIOR button (17) to set the
waffl es to be fl uffy on the inside and crispy
on the outside. Press the UNIFORM TEX-
TURE button (16) to create waffl es with a
uniform texture.
The chosen option (13, 15) is correspond-
ingly shown on the display (4) .
LOCKING CATCH
The device has a transport safeguard in
the form of a locking catch (2) in order to
prevent the device from unintentionally
fl ipping open. To secure the two halves
of the device, slide the locking catch over
the locking lug (3) until you hear and feel it
engage (Picture C).

USE

Please Note!
■ The device must not be left unattended
during operation!
■ In the interest of your own safety,
inspect the device and the connecting
cable for damage each time before
you use it. Use the device only if it is in
working order.

Although the baking surfaces (6,
7) have a non-stick coating, we still
recommend that you lightly grease
them before fi rst use. Do not use
any cooking spray as it can attack
the non-stick coating!
EN
17