UNPLUG CORD
■ To minimize shock and fire hazards, please do not plug or unplug the cord with
wet hands.
■ During maintenance and cleaning, please unplug the unit.
PROPER GROUDING REQUIRED
■ To minimize shock and fire hazards, make sure that the unit is properly
grounded.
WARNING
■ Do not attempt to remove or repair any component unless instructed by
factory.
■ Make sure that the unit is not resting on or against the electrical cord or plug.
■ To minimize personal injury, do not hang on the doors.
■ Do not store any flammable or explosive gas or liquids inside the unit.
■ Do not attempt to alter or tamper with the electrical cord.
■ Do not set the desired temperature out of the recommended temperature
o
range: (32
F- 50
SAVE THESE INSTRUCTIONS
Horizontal Bottle Coolers
o
F).
5