R
x 4
FIG. 10
10. Attach Drawer Slides (Drawer Side Left) (Q4) and (Drawer Side Right) (Q3) to the drawer.
The wheels should be to the rear and the front edge should be flush against the back of the
Drawer Front. Attach each slide with two Screws (R). See FIGURE 10.
Y
x 6
FIG. 11A
11. Attach Towel Bar (X) to Drawer Front (H) using Machine Screw (Y). See FIGURE 11A. Attach
a Towel Bar (X) to each end of the island through the pre-drilled holes in the End Aprons (D)
using Machine Screws (Y). See FIGURE 11B.
R
R
Y
Y
The drawer slide will be stamped with an
Q3
"L" for left or an "R" for right in the center of
the wheels. Or they will be stamped on the
body of the slide: "CL" for cabinet left; "DL"
for drawer left; "CR" for cabinet right; "DR" for
drawer right.
Q4
R
R
Y
Y
FIG. 11B
203W – Page 7