Operation Conditions - Philips HP3643/01 Manual De Instrucciones

Problem
The appliance
does not switch
on.
Specifications
Model
Rated voltage (V) Hong Kong/Singapore/Europe
Rated voltage (V) China/Korea
Rated voltage (V) Malaysia
Rated voltage (V) Taiwan
Rated frequency (Hz) Hong Kong/Singapore/
Europe
Rated frequency (Hz) China/Malaysia
Rated frequency (Hz) Korea/Taiwan
Rated power input (W)
Insulation class
Classification applied part
Ingress of water
IR type
Irradiance (W/m²)
Field dimensions (in cm²)
Battery type

Operation conditions

Temperature
Relative humidity
Cause
The plug may not be
inserted properly into
the wall socket.
There may be a
power failure.
The lamp may be
defective.
The mains cord of the
appliance may be
damaged.
Solution
Insert the plug properly into the wall socket.
Check if the power supply works by connecting
another appliance.
Contact the Philips Consumer Care Centre.
Check the mains cord. If the mains cord is
damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly
qualified persons in order to avoid a hazard.
HP
220-230
220
240
110
50/60
50
60
650
II
not classified
IPX0
IR A/B/C
approx. 1000
60x40
not applicable
from +10°C to +35°C
from 30% to 90% (no condensation)
EnglisH
11