Preparation; Operation Instructions - Smartpond 52688 Manual De Instrucciones

PREPARATION

Before beginning assembly or operation of product, make sure
all parts are present. Compare parts with package contents list
and diagram. If any part is missing or damaged, do not attempt
to assemble, install or operate the product. Contact Customer
Care for replacement parts.
• Estimated Assembly Time: 20 minutes
• Tools required for assembly: hacksaw, philipshead screwdriver.

OPERATION INSTRUCTIONS

For maximum water flow, it is recommended that the largest tubing size
recommended is used. If you use 1-in ID tubing, skip to step 2.
Step 1. If using 1-1/4-in
or 1-1/2-in ID tubing, trim
the tubing adapter using
a hacksaw at the location
indicated.
Step 2. Assemble the
tubing adapter to the
filter using a gasket for a
waterproof seal and fasten
with a locking ring-adapter
around each tubing adapter.
Step 3. At this time, if you
would like to partially burry
this filter for a more discrete
appearance, you can do so
up to just below the height
of the clamps.
4
VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
cut adapter
1-1/4-in
ID Tubing
2
1
cut adapter
1-1/2-in
ID Tubing
3