Lifting the Sportjet
The Sportjet may be lifted using with the lifting strops or
single point lift, if fitted. Please read the instructions
supplied with these carefully.
CAUTION.
Damage to the tender may
result if the following procedure is
not adopted.
Tilt helm down before attempting to
lift the Sportjet (460 and 520 only)
when using standard Williams-
supplied lifting strops. Lifting
strops are available as an
optional accessory. Ensure
fastenings are attached correctly
before lifting.
WARNING.
Risk of injury or death. When Williams lifting strops or the
single point lift are used, please refer to instructions supplied with the equipment and
adhere to the Safe Working Load values as follows: All Sportjet models: 750 kg max
Reboarding the Sportjet
1 Ensure engine is off and kill cord is
removed.
2 Lift up retaining flap and pull out ladder
from underside of transom.
3 Ensure ladder is fully extended.
4 Climb ladder to access the bathing
platform.
5 Ensure ladder is stowed with the retaining
flap folded down before moving off.
23