How To Hang Your Ceiling Fan - Luminance Brands Kathy Ireland Home DUO CF560BS00 El Manual Del Propietario

CAUTION
!
To reduce the risk of injury, install the fan so that the
blades are at least 7 ft. (2.1m) above the floor (Figure 5).
WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box or circuit breaker panel before
wiring. All wiring must be in accordance with National
and Local codes and the ceiling fan must be properly
grounded as a precaution against possible electrical
shock.
WARNING
!
The outlet box and joist must be securely mounted and
capable of supporting at least 50 lbs. Use only a U.L.
outlet box listed as "Acceptable for Fan Support of
22.7 kg. (50 lbs.) or less".
WARNING
!
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked "Acceptable
for Fan Support of 22.7 kg. (50 lbs.) or less", and
use screws supplied with outlet box. Most outlet
boxes commonly used for support of light fixtures
are not acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
4.1
Disconnect Electrical Power to the Branch Circuit at
the Circuit Breaker Panel or Main Fuse Box before
attempting to install the Ceiling Fan Mounting Plate on
the Outlet Box .
AT
LEAST
7'
Figure 5
Figure 6
4.2
Pull the Electrical Supply Black, White and Ground
Wires through the center opening of the Ceiling
Mounting Plate before securing the plate to the Outlet
Box (Figure 6) .
Position the Ceiling Mounting Plate onto the Outlet Box
and secure using the two Outlet Box Screws, supplied
with Outlet Box (Figure 6) .
8
CEILING
FLOOR
OUTLET BOX
CEILING MOUNTING
PLATE
CEILING MOUNTING
PLATE GREEN
GROUND WIRE
CEILING MOUNTING
PLATE HOOK
OUTLET BOX SCREWS (2)
U.L. Model No.: CF560