Conservation Tips; Practical Guide - Nogueira SDN-170A Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Conservation tips

We recommend performing overall tune-up procedures yearly, at the end of each harvest season, in
order to identify and replace worn or damaged parts.
At the end of each harvest season, we recommend the following measure:
- Carefully wash the machine with water;
- Remove the chains and store them bathed in oil;
- Remove the plastic tarp and store it;
- Retouch the paint wherever necessary;
- Replace worn or damaged parts;
- Apply anti-corrosive oil to the metallic parts of the machine;
- Lubricate adequately;
- Store the mower in a dry and protected place.

Practical guide

SYMPTONS
Improper cutting
Overheating of the
transmission
Excessive noise
It is difficult to manually turn
the discs
24
PROBABLE CAUSE
Incorrect rotation
Blades are dull or damaged
Belt slippage
Blades are assembled in the
wrong rotation direction
Cutting is too high
Incorrect oil level
The belts are too tight
The disc shields are shifted
and blocking their movement
Dirt is accumulated below the
discs
Instructions Manual
SOLUTION
Correct rotation (540 rpm in
the power take-off)
Sharpen, change position or
replace
Tighten the belts
Verify the blade rotation
direction
Adjust the cutting height
Verify the oil level
Correct the belt tightness
Retighten the shields
Clean the discs and blades

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido