Seal
here.
Seal
here.
8. Caulk the Bottom Track and Wall Jambs
NOTE: Thoroughly clean all dust, dirt, or grease from the bottom track and shower ledge surfaces where
sealant will be applied. Make sure the surfaces are dry.
NOTE: Your shower door may not appear exactly as shown. The application of sealant or caulk is the
same.
Carefully apply caulk or sealant where:
the wall jambs and wall meet inside the shower.
the bottom track and wall jamb meet.
the outside area of the bottom track meets the bath/shower threshold on the outside of the door.
1054858-2-B
Seal
here.
Inside
of Bath
14
Seal
here.
Kohler Co.