5. Table tripod
• Open the lock on the tripod legs
• Disassemble the long tripod legs
• Assemble the short tripod legs, which
are stored in the side compartment of
the bag
• By removing the tripod hook, the short
centre column can be retracted and
fastened, if required
Leg angle adjustment:
• Pull the clips and make sure that these have been loosened completely
• Lock the tripod legs at any pre-locked angle
• If necessary, tighten the screws with the supplied Allen key
Spikes / rubber feet
• The rubber feet can be removed by twisting
• The spikes, which are particularly suitable for outdoor use,
are then uncovered
11