3/ Installation - Pool Technologie Nano pH Manual Del Usuario

3/ INSTALLATION

Before installing the device, always check and correct the following:
 The equipment room must be dry and properly ventilated, protected from rain, splashing, water spray and
UV radiation.
 Select a location for the can of the pH corrector product that is far enough away from any electrical
equipment or any other chemicals. Failure to follow these instructions will cause abnormal oxidation of
the metal parts possibly resulting in the complete failure of the device.
 The electronics box and its accessories must be mounted strictly according to the following installation
diagram.
The device is designed to operate only in acidic mode (pH minus).
NANO pH – PAPI004092MULTI – FR/EN/DE/ESP/IT/PT – Rev.04.15
4