LaserLiner SuperSquare-Laser 2G Manual Del Usuario página 9

2 On-floor applications
Turn on the unit with the ON / OFF
switch (1). The laser lines now produce
2 marks at 90° angles on the floor.
These projected lines allow tiles to be
laid easily, yet precisely. The 90° lay
edge (4) and the contact surface (5)
make it easy to align the first floor tile.
Green laser technology
therefore easily visible line image. Unlike previous generations
they are more temperature-stable and energy efficient.
Furthermore, the human eye has a higher sensitivity to the
wave range of the green laser than the red laser, for example.
This makes the green laser diode appear much brighter than
the red one.
Green lasers, especially in the DLD design, thus offer
advantages with regards to how visible the laser line is under
unfavourable conditions.
3 Wall applications
Mount the device on the wall for horizontal and vertical
levelling. Then align the device with the vials.
4 Mounting on the wall
1. Place device on the wall.
2. Push the special pins through
the appropriate holes.
!
Regularly check the calibration before use, after
transport and after extended periods of storage.
SuperSquare-Laser 2G
Laser modules in DLD design stand for high
line quality as well as a clean and clear and
Approx. 6 times brighter than a typical red laser
with 630 - 660 nm
09
EN