Unit Mount; Operation Incoming Call; Incoming Call Redirection - Auta FREE Manual De Instrucciones

UNIT MOUNT

1- Take the surface mount bracket from the kit and situate it 150-160 cm
from the floor line.
2- Mark and drill four halls in the wall.
3- Take four nuts from the kit and hammer them into the drilled halls.
4- Fix surface mount bracket on the wall by four screws from the kit.
5- Connect all communication wires and fix the monitor on the surface mount bracket.
SETTINGS
English − Language;
English
Melody − melody selection for call;
Melody 01
Call volume 08
Call volume − volume selection for call;
Call time
30
Call time − call duration (seconds);
Opening time
02
CCTV 1
NO
Opening time − door opening duration (seconds);
CCTV 2 NO
Exit
CCTV 1 − external camera 1 input enabled.
CCTV 2 − external camera 2 input enabled.
Up
Press
"Menu"
Down
5
OPERATION. INCOMING CALL
Visitor presses call button
on the first panel
Press «Answer» button to start
conversation with the visitor
Melody stops ringing and
conversation starts,
talking time is 120 seconds
Press «Unlock» button to open
lock connected to the current
door panel, relay built into the
panel will manage the lock
Notes:
1- Monitor will be automatically switched into standby mode if the user doesn't answer
incoming call during 60 seconds;
2- Image and sound from the door panel only will be active during 20 seconds after the
moment user presses
Standby mode
Visitor presses call button
on the second panel
Melody is ringing on the
monitor and door panel,
image from the door panel
appears on the monitor screen
Press «Hang up» button to
Answer
stop conversation or
incoming call
Unlock
20 seconds
button.
Unlock
6
Hang up
Standby mode