Metrohm 794 Basic Titrino Instrucciones Para El Uso página 117

794 Basic Titrino
3.2.2.61. SmplData.ONSilo.Counter.MaxLines
SmplData.ONSilo.Counter.FirstLine
SmplData.ONSilo.Counter.LastLine
Information on silo memory.
.MaxLines: Maximum possible number of silo lines.
.FirstLine: Lowest valid silo line.
.LastLine: Last occupied silo line.
3.2.2.62. SmplData.ONSilo.EditLine.1.Method
SmplData.ONSilo.EditLine.1.Id1
SmplData.ONSilo.EditLine.1.Id2
SmplData.ONSilo.EditLine.1.Id3
SmplData.ONSilo.EditLine.1.ValSmpl 6-digits, sign and dec.point
SmplData.ONSilo.EditLine.1.UnitSmpl
SmplData.ONSilo.EditLine.1.C24
SmplData.ONSilo.EditLine.1.C25
SmplData.ONSilo.EditLine.1.Mark
etc., up to .99
Contents of a silo line.
.Method: Method used to process the sample, from the method memory or
from the card.
.Id: The identifications Id1...Id3 can also be used as sample-specific
calculation constants C21...C23 in formulas.
.UnitSmpl: If "no unit" is desired for the sample size, the blank string must be
entered.
.C24, .C25: Results which have been assigned to C24 and C25.
.Mark: Mark of the silo line: "*"=deleted line, "+"=line which is worked
off, "-"= line which is worked off and not valid for silo calcula-
tions (deleted), "/" last worked-off line, where recalculation can
still be done. Silo lines which have been worked off are "read
only".
3.2.2.63. SmplData.ONSilo.DelLine
SmplData.ONSilo.DelLine.LineNum
Deletion of a silo line. The line # is deleted with &SmplData.ONSilo.DelLine
$G. If a formerly deleted line is edited again, it becomes valid (function "unde-
lete").
3.2.2.64. SmplData.ONSilo.DelAll
Deletes the entire silo memory. Must be triggered with $G.
3.2.2.65. SmplData.ONSilo.CycleLines
Silo data cycling.
With "ON", executed lines are copied to the next free silo lines, see page 71.
Exercise caution if you edit the silo memory during the determinations!
3.2.2.66. SmplData.ONSilo.SaveLines
3.2 Remote control commands
up to 8 ASCII characters
up to 8 ASCII characters
up to 8 ASCII characters
up to 8 ASCII characters
up to 5 ASCII characters
read only
read only
read only
read only
read only
read only
$G
1...99, OFF
$G
ON, OFF
ON, OFF
113