Klarfit Float Manual De Instrucciones página 12

EN
12
B Positioning the handles
• Take the two handles (1) out of their plastic cover, insert them into the
right and left parts of the stem (7).
• For each of the two handles, you should hear a "click", indicating that the
handles are engaged (1). Check that the two spring buttons are effectively
out and visible
• The scooter with suspension, open the handle quick-release lever(2)and
follow the instructions below before tightening it fi rmly.
C Adjusting the handlebar height
• Open the steering column rapid tightening lever (8).
• Adjust the height of the handlebars until you hear a "click", indicating
engagement in one of the two indexed positions.
• Then fi rmly tighten the steering column rapid tightening lever (8).
D Folding down the handlebars
• Open the steering column rapid tightening lever(8), press in steering
column spring button (3).
• lower the handlebars, then tighten the steering column rapid tightening
lever (8).