LEDS C4 Gea RGB Easy+ Instrucciones De Montaje página 27

1.-Definition and components of the EASY RGB+ system
The EASY RGB+ system is a non-standard protocol owned by Leds-c4 that allows the control of RGB fittings using only
3 wires.
The MASTER and SLAVE controllers available only can feed Leds-c4 fittings that come with the EASY RGB+
feature. You can check that the product comes with this feature in our general catalogue. Note that EASY RGB+
fittings are not compatible with other control protocols.
1.1.-MASTER controller:
71-E069 150W
71-E011 50W
This controller stores the colour sequences and fixed colours and generates the RGB signal that fittings will recieve.
Both controllers come with an integrated push button that triggers the colour sequences. The big controller also
comes with a remote control. All EASY RGB systems requires at least one Master controller.
Colour scenes:
-8 changing colour sequences.
-Fixed colours.
With remote control and push button on the box.
With push button without remote control.