Jocel JFE011183 Manual De Instrucciones página 62

Door removal
In order to obtain easier access to the oven chamber for cleaning, it is possible to remove the
door. To do this, tilt the safety catch part of the hinge upwards. Close the door lightly, lift and
pull it out towards you. In order to fit the door back on to the cooker, do the inverse.
When fitting, ensure that the notch of the hinge is correctly placed on the protrusion of the hinge
holder. After the door is fitted to the oven, the safety catch should be carefully lowered down
again. If the safety catch is not set it may cause damage to the hinge when closing the door.
Removal of the internal glass panel
Unscrew and unfasten the plastic latch that is in the corner at the top of the door .Next take out
the glass from the second blocking mechanism and remove. After cleaning, insert and block the
glass panel, and screw in the blocking mechanism.
Door removal
Removal of the internal glass
panel
-58-