Cleaning The Water Tank - Brandson Equipment 305040 Manual Del Usuario

8.2 Cleaning the water tank

1. The water tank has to be cleaned at the latest after 2 weeks to prevent the
formation of mould or bacteria.
2. Remove the water tank and clean it with a mild cleaning agent and warm
water.
3. Then dry the water tank with a soft cloth.
4. Replace the water tank.
Caution! Do not use boiling water to clean the tank.
8.3 Storage
Empty the water tank completely if you do not intend to use the appliance for a
long time and want to store it.
Allow the appliance to run in fan mode for four hours at low speed, so that the
inside of the appliance dries completely.
Then store the appliance in a dry place.
9. Safety instructions and disclaimer
Never try to open the appliance to repair or make modifications. Avoid contact
with the mains voltage. Do not short-circuit the product. The appliance is not
waterproof, therefore please use it only in dry surroundings. Protect it from high
humidity, water and snow. Do not expose the appliance to high temperatures.
Do not expose the appliance to sudden changes in temperature or strong vibra-
tions, as this could damage the electronic components. Check the appliance for
any damage before using it. The appliance should not be used if it was subject
to impact or has been damaged in some other manner. Please comply with the
local regulations and restrictions. Do not use the appliance for purposes other than
those described in the user manual. This product is not a toy.
38
English