Mettler Toledo IND246 Guia De Instalacion página 34

2.4.2.1. Cable Gland Assignments
The cable glands on the back of the enclosure are labeled in Figure 2-18 and explained in Table
2-2. Note that, in the AC model, the positions of the power cord and load cell cable differ depending
on the orientation of the front panel – refer to section 2.3.2, Wall or Column Mounting with Brackets
on page 2-3.
2-12 METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual
Figure 2-17: Ground Studs Inside Enclosure
1
1
Figure 2-18: Cable Gland Assignments, AC Model (top) and Battery Model (bottom)
Table 2-2: Cable Gland Assignments
Standard Front Panel
Gland
Orientation
1 AC Power Cord / None*
2
3
4
5
2 3 4 5
2 3 4 5
Assignment
Reversed Front Panel
Load Cell Cable
COM1
COM2 / Digital I/O
Digital I/O
Ethernet / USB
6
6
Orientation
64084463 | 03 | 12/2017