Fcc / Rss Compliance - Fronius Rapid Shutdown Box-Duo Instrucciones De Instalación

Ocultar thumbs Ver también para Rapid Shutdown Box-Duo:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Rapid Shutdown Box - Duo
NOTE!
Solar modules exposed to light supply current to the Rapid Shutdown Box if they
are connected.
NOTE!
When installing outdoors, only use waterproof conduit fittings and conduits.
Conduit fittings and conduits are not included in the Rapid Shutdown Box's scope of sup-
ply. Conduit fittings must always be installed with a locknut. Ensure that the conduit fit-
tings are installed and sealed correctly.
NOTE!
When connecting DC cables, ensure the polarity is correct.
ATTENTION! ?
The trigger device (inverter) of the Rapid Shutdown Box must be marked to clearly
identify the status of the Rapid Shutdown Box.
If the Rapid Shutdown Box loses the AC connection, the inverter becomes the trigger
and display device.
FCC / RSS Com-
FCC
pliance
This device corresponds to the limit values for a digital device of class B in accordance
with Part 15 of the FCC regulations. The limit values should provide adequate protection
against harmful interference in homes. This device creates and uses high frequency
energy and can interfere with radio communications when not used in accordance with
the instructions. However, there is no guarantee against interference occurring in a par-
ticular installation.
If this device interferes with radio or television reception when turning the device on and
off, it is recommended that the user solve this with one or more of the following meas-
ures:
-
-
-
-
Industry Canada RSS
The device corresponds to the license-free Industry Canada RSS standards. Operation
is subject to the following conditions:
(1) The device may not cause harmful interference
(2) The device must accept any interference received, including interference that may
cause undesired operation.
(1)
adjust or reposition the receiving antenna
increase the distance between the device and the receiver
connect the device to another circuit, which does not include the receiver
for further support, please contact the retailer or an experienced radio/TV technician.
Rapid Shutdown Box - Quattro
(1)
5

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rapid shutdown box-quattro

Tabla de contenido