Getting Started; Radio Functions; Cassette Functions - auna Duke MKII Manual De Instrucciones

EN
14

GETTING STARTED

• Insert the plug into the socket.
• During music playback, you can adjust the volume on the volume
control and the bass on the bass control.
Note: If there is no signal from the cassette, USB, SD or BT for more
than 10 minutes, the cassette recorder will automatically turn off to save
power. To restart the unit, first set the function switch to OFF and then to
the desired function.

RADIO FUNCTIONS

Set the function switch to RADIO, then select the desired BAND (FM, AM, SW1, SW2).
Hints for better reception
1. AM: there is a built-in am bar antenna. If am rececption is weak, slightly
rotating or re-positioning of the unit will usually improve the am
reception.
2. FM: the receiver has a built-in fm wire antenna hanging at the rear
cabinet. This wire should be totally unraveled and extended for best
reception.

CASSETTE FUNCTIONS

Key functions
Stop / Eject: Press this button to stop the cassette. Press the button again
to open the cassette door.
Fast Forward: Press this button to fast forward.
Rewind: Press this button to fast rewind.
Playback: Press this button to play the cassette.
Pause: Press this button to stop playback temporarily. Press the button
again to resume playback.
Recording: Press this button together with the Play button to start
recording. You can record from Radio, BT, Built-in microphone, USB and
SD to cassette.