Usb/Sd Functions - auna Duke MKII Manual De Instrucciones

Playing a Cassette
• Set the function switch to TAPE.
• Insert a cassette.
• Press the Play button on the tape deck to start playback.
• Use the Pause button to temporarily stop playback.
• To stop playback, press the Stop/Eject button.
Recording a Cassette
From Radio, BT, USB, SD:
• Set the function switch to the desired mode (Radio, BT, USB, SD).
• Press the [Play & Record] buttons simultaneously. The signal from the
desired mode is now recorded to tape.
From the Built-in microphone:
• Set the function switch to TAPE.
• Press the [Play & Record] buttons simultaneously. Everything you speak
into the microphone will now be recorded on tape.

USB/SD FUNCTIONS

The device can detect and read Mp3 and WMA files located on a USB/SD
memory.
Note: Be sure to insert the stick or card correctly into the unit to avoid
damage.
Set the function switch to MUSIC and then insert the USB/SD memory into
the appropriate slot.
• USB Playback: The LED light flashes red.
• SD Playback: The LED light flashes green.
EN
15