Manually Selecting An Fm Frequency; Storing And Selecting A Frequency - Belkin TuneCast Auto PM01714ea Manual Del Usuario

seleCTInG An fM fReqUenCY
sections
table of contents

Manually selecting an fM frequency

If you want to use a specific frequency, you can manually select it on your TuneCast Auto
1� Tune your stereo to a frequency between
stations The ideal frequency is one not
broadcasting a radio station's signal
2� Press the + or - button on your TuneCast
Auto to select the same frequency
1. Find a frequency without a station on it.
A good frequency will be between other
stations, with a lot of static.
3� To identify the best available frequencies
in your area, visit wwwbelkincom/
mybestfm
TuneCast Auto for iPhone and iPod
®
1 2
2. Match station using the (+)
and (-) buttons.
4
3 4 5

storing and selecting a frequency

You can store two frequencies using the
"m1" and "m2" buttons
1� To store a frequency, select the desired
frequency on your TuneCast Auto using
the + or - buttons Press and hold the
"m1" or "m2" preset button for two
seconds The "m1" or "m2" icon will flash
on the screen when the frequency is set
2� To recall a preset frequency, press
the "m1" or "m2" preset button Your
TuneCast Auto will change to the preset
frequency
6 7