Technical Specifications - Johnson Controls tyco 3G4000W Manual

Technical specifications

The input voltage to the 3G4000W can be drawn from the UL/ULC Listed control panel or provided
by an external UL/ULC Listed power supply (with battery back-up) rated for the application
(external power-limited source).
Table 1: 3G4000W Technical specifications
Product Input Voltage and Current Draw
3G4000W Input Voltage / Input Current
(Nominal)
Average Current
Peak Current (no battery)
Peak Current (with battery)
* Plus any current draw from the 3G4000W +ve terminal if outputs are used
Battery (Sold Separately)
Battery Type
Battery Charging Voltage (maximum)
Battery Charging Current
Battery Standby Time
Note: The battery must be replaced every three to five years
Radio and Antenna
Supported Cellular Bands
Cellular Antenna Gain
WCDMA B5, WCDMA B8, GMS 850, GSM 900
WCDMA B1 (Tx), WCDMA B2, DCS 1800, PCS 1900 6.2 dBi
WCDMA B1 (Rx)
Environmental Specifications
Operating Temperature
Humidity
Mechanical Specifications
Dimensions, Plastic Enclosure (painted)
Weight (without battery)
3G4000W 3G (HSPA) WIRELESS ALARM COMMUNICATOR INSTALLATION MANUAL 5.0
3G4000W Technical specifications
13.8 VDC/700 mA (when supplied by compatible
external power adapter)
9-14 VDC/500 mA (use listed, compatible control
panel or power supply)
40 mA*
180 mA*
350 mA*
NiMH, rated 7.2V, 2.2 AH
9.1 VDC
160 mA
Greater than 24 hours
2G Bands – GSM 850, GSM 900, DCS 1800, PCS
1900
3G Bands – FDD Band 1 (2100 MHz), Band 2
(1900PCS), Band 5 (850MHz), Band 8 (900 GSM)
2.5 dBi
2.8 dBi
0°C - 49°C (32°F - 120°F)
93%RH Maximum (non-condensing)
125 mm (W) x 220mm (H) x 31mm (D) / 8.7" x
4.9" x 1.2"
400g / 14 oz
Note: While the radio module in the
product supports all bands listed, the
regional cellular carrier may not support
them all. Please check with your local
cellular carrier to see which band(s) they
support to determine compatibility.
7