STEINEL PROFESSIONAL RC 8 Información página 2

D GB F NL I E P S DK
3
4
5
6
12
14
15
110029064 12/2016_J
ENGLISH
Principle
The optional remote control for the Presence Control PRO makes larger-scale lighting systems easier to install as it
obviates the need to set each presence detector prior to installation. Any number of Presence Control detectors can
be controlled by remote control. The blue LED on the sensor flashes to indicate each valid press of the button.
Functions
Reach setting (factory setting: 8 m max.)
1 Reach can be set from a minimum of 1 m, 1/3, 2/3 to a maximum of 8 m by pressing these buttons
(for HF-sensors only).
2
Basic light level (10%) (factory setting: OFF)
Basic light level deactivated
Information
Basic light level all night
RC 8
Basic light level for the time shown
Time setting CH 1 - stay-'ON' time Switching contact 1 (factory setting: IQ mode)
3 Test mode. The test mode has the purpose of checking for proper working order as well for testing the
detection zone. Irrespective of ambient light level and movement, the presence detector activates the light
FI N GR TR H
to stay 'ON' for approx. 8 sec. Test mode has priority over all other settings. All user-selected settings apply
in normal mode. Test mode ends automatically after 10 min.
4
IQ mode. Stay-'ON' time is self-learning and adjusts dynamically to user behaviour. The optimum time is
determined by means of a learning algorithm. The shortest time is 5 min., the longest time 20 min.
1
5 Setting the light to stay 'ON' for a time of your own choice. Each press of the button increments the
chosen time setting by 1 minute.
6
The period of time you want the light to stay 'ON' for after last detecting movement can be set from
between 5 min., 10 min. to 30 min. by pressing these buttons.
Time setting CH 2 - stay-'ON' time Switching contact 2 (HVAC) (factory setting: 5 min.)
2 7
The period of time you want light 'ON' for / to stay 'ON' for after last detecting movement can be set
from between 5 min., 10 min. to 15 min. by pressing these buttons.
Time setting CH 2 - Delay (time delay) (factory setting: ON/OFF)
8 Room surveillance ON/OFF
Automatic adjustment of switch-'ON' delay after persons are present in the detection zone.
7
9
No time delay.
10 Time delay 10 min.
8
Light threshold setting (factory setting: 5)
11 The chosen response threshold can be set from approx. 10 – 1000 lux.
9
Examples of use
Night-time mode
Corridors, foyers
10
Stairs, escalators, moving walkways
Washrooms, toilets, switchrooms, canteens
Sales floor, kindergartens, nursery school rooms, sports halls
Work areas: offices, conference and meeting
rooms, precision assembly activities, kitchens
Working areas requiring good light:
Laboratory, technical drawing, precision work
11
Daylight mode
12
Night mode
13
14 Teach-IN. Light level setting using the memory button/Teach mode. This button must be pressed at the
16
level of light at which you want the sensor to respond to movement from now on. The current twilight
value is saved.
15 Constant-lighting control (factory setting: ON)
17
ON = blue LED lights up. OFF = blue and red LED light up
16 Automatic or manual mode (factory setting: ON / fully automatic)
ON = blue LED lights up. OFF = blue and red LED light up, manual mode
17 Reset
Resets all settings to the values selected on the detector manually or to the factory settings.
CR2032
GB
Brightness settings
1
2
3
4
5
6
13
Daylight mode
Functional Warranty
This STEINEL product has been manufactured with utmost care, tested for proper operation and safety and then sub-
jected to random sample inspection. STEINEL guarantees that it is in perfect condition and proper working order. The
warranty period is 36 months and starts on the date of sale to the consumer. We will remedy defacts caused by mater-
ial flaws or manufacturing faults. The warranty will be met by repair or replacement of defective parts at our own
discretion. The warranty does not cover damage to wear parts or damage and defects caused by improper treatment,
maintenance or the use of non-genuine parts. Further consequential damage to other objects shall be excluded. Claims
under the warranty will only be accepted if the unit is sent fully assembled and well-packed with a brief description of
the fault, a receipt or invoice (date of purchase and dealer's stamp) to the appropriate Service Centre.
Service: If defects occur outside the warranty period or are not covered by warranty, ask your nearest service station
for the possibility of repair.