Video Setup - Singing Machine STVD-1001 Manual De Instruccion

INITIAL SETUP
AUDIO SETUP
SPDIF Setup
SPDIF Output
SPDIF/RAW
Choose this setting, if your DVD player is connected to a
power amplifer with a coaxial cable or an optical cable.
When playing a disc recorded with DTS and MPEG
audio formats, the corresponding digital signals will be
output from the Coaxial Output jack. This player's digital
output jacks are designed for a connection to a DTS or
MPEG receiver or decoder.
SPDIF/PCM (Sony-Philips Digital Interface Format/
Pulse code modulation)
Choose this setting, if your DVD player is connected to a
2-channel digital stereo amplifier. When playing a disc
recorded with MPEG audio formats, the audio signal will
be output from the Coaxial Output jack or Optical Output
jack.

VIDEO SETUP

Sharpness
Choose this setting to adjust the sharpness of the video
output. High, medium and low are the 3 different
settings that can be selected.
Brightness
Choose the remote control cursors to adjust the
brightness value , which ranges from -20 to +20.
Contrast
Use the remote control cursors to adjust the contrast
value , which ranged from -16 to +16.
PREFERENCE SETUP
PARENTAL CONTROL
This function limits the playback of DVDs based on the
Motion Picture Association of America's rating assigned
to each movie. Parent's can specify the ratings that
require a password to view. The rating listed from low to
high, KID SAF is the lowest and ADULT is the highest.
To turn off this setting, use the cursor on the remote
control to select the last option (Not shown in the
following).
NOTE - When changing the parental lock password,
use the number buttons to enter the password
and press ENTER button to confirm.
PASSWORD
This option is used to change the password. User must
enter the old password prior to creating a new one. The
default password is 0000
password is highly recommended.
DEFAULT
This option is used to reset all functions in this unit back
to the initial status setting by the factory.
E22
. Remember the new