Basic Operations; Basic Playback; To Play A Disc; To Stop Playing Disc - Singing Machine STVD-1001 Manual De Instruccion

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BASIC OPERATION
BEFORE PLAYING
!
Please check the "Playable Discs" to confirm the disc being used is playable.
!
Confirm the Singing Machine is connected to the component/s properly and the power of the Singing Machine
and the other component/s are on.

BASIC PLAYBACK

TO PLAY A DISC

1. Press the STANDBY button on the machine to
turn on the unit.
2. Press the FUNCTION button on the machine or
the remote control until LOADING appears on the
LCD of your Singing Machine.
3. Press the Open/Close button on the unit to open
disc compartment.
4. Place the disc in the compartment with the printed
side facing toward you.
5. Press the Open/Close button on the unit to close
disc compartment
6.
Press the PLAY/PAUSE button to start playing the
disc.
NOTE:
1.
For some discs, playback will start from the first
chapter or track of the disc automatically.
2. When you playback a DVD a title menu is
recorded, it may appear on the screen. In this
case, refer to "
TITLE
" section.
CAUTION:
Keep your fingers away from the disc tray
as it is closing. Neglecting to do so may
cause serious personal injury.
TO STOP PLAYING A DISC
1. Press the STOP button to stop the disc from
playing. A blue screen with The Singing Machine
logo will appear on your TV screen. "Press the
play button to continue" the picture will appear on
the TV screen.
2.
Press the PLAY/PAUSE to resume playback. The
playback resumes from the same point the STOP
button is pressed.
NOTE:
1. Pressing the STOP button again after the disc
stops playing will clear the location index stored in
memory.
DVD - Playback starts from the beginning of the
current title.
CDG/CD - Playback starts from the beginning of
the disc.
2.
When playing an MP3 or JPG picture CD pressing
STOP will not maintain a memory because there
is no index location stored.

TO REMOVE A DISC

1. Press the STOP button.
2. Press the Open/Close button on the unit to open
the disc compartment.
3. Remove the disc from the compartment.
4. Press the Open/Close button on the unit to close
the disc compartment
TO GO TO NEXT AND PREVIOUS
CHAPTER/ TRACK
For DVD disc: Pressing PRE
1.
button can go to the next or previous chapter on
the disc.
2
For CDG/CD/MP3 disc: Pressing NEXT
.
PRE
aaa
button will enable you to go to the next or
previous track on the disc.
NOTE:
1. When PRE
aaa
button is pressed once during
normal playback of DVD, the chapter being
played will be played from the beginning.
2. Input the index of the chapter or track by pressing
the NUMBER buttons during the normal
playback, the playback will go to that chapter or
track directly.
TO PLAY IN FAST REVERSE OR FAST
FORWARD
1. During normal playback of a DVD, CD or MP3,
press the FWD button to fast forward and press
the REV button to fast reverse.
2. Each time you press either button it will change
the playback speed. The following sequence will
appear on screen.
FWD: 2X
4X
8X
not display on screen)
REV: 2X
4X
8X
not display on screen)
The rate and direction of playback is indicated on
the display.
3. Press the PLAY button to return to normal
playback.
NOTE:
1. This function is not available for CDG and JPG
picture CD discs.
2. The Singing Machine omits the subtitle and mutes
sound during fast forward or fast reverse mode.
3. The speed of the fast forward or fast reverse may
differ depending on the disc.

TO PAUSE PLAYBACK (STILL MODE)

1. Press the PLAY/PAUSE button during playback.
2. Press the PLAY/PAUSE button again to resume
playback.
NOTE:
1. This function is available for all discs.
2. The sound is muted during this mode.

VOLUME CONTROL

Pressing master volume buttons +/- on the remote
control or on the unit can adjust the volume of the
audio output.
E23
aaa
or NEXT
aaa
aaa
or
16X
Normal Play (It will
16X
Normal Play (It will

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido