Use; Select Operating Mode; Switching On And Off; Adjusting The Rotational Speed - Kompernaß Parkside PBH 800 A1 Traducción Del Manual De Instrucciones Original

Use

Select operating mode

Function selector
♦ Press and hold the release button
function selector switch
selector switch so that the required symbol
engages at the arrow mark:
Function
Drilling/screwing
Hammer drilling
Chiselling
Chisel position adjustment
Adjusting chisel position
You can rotate the tool to the required position for
chiselling using this function .
♦ Turn the function selector switch
position .
♦ Turn the tool in the tool holder
required position .
♦ Turn the function selector switch
position for the chiselling function .

Switching on and off

Switching the appliance on
♦ Press the ON/OFF switch
Switching the device off
♦ Release the ON/OFF switch
Switching to continuous operation
♦ Press the ON/OFF switch
pressed position with the ON/OFF switch
lock button .
Switching off continuous operation
♦ Press the ON/OFF switch
again .
PBH 800 A1
on the
. Turn the function
Symbol
to
to the
to
.
.
. Lock it in the
and release it

Adjusting the rotational speed

The ON/OFF switch
control . Pressing the ON/OFF switch
yields a low speed . Increasing pressure increases
the speed .

Changing the direction of rotation

♦ Change the direction of rotation by pressing the
rotation direction switch
right .

Maintenance and cleaning

WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
■ Never permit liquids to penetrate inside the
appliance .
■ Use a soft, dry cloth to clean the housing .
■ Clean the tool holder
CAUTION! PRELOADING!
♦ To do this, pull the locking collar
and pull the dust protector cap
of a screwdriver off the tool holder
WARNING!
► If the power cord requires replacement, this
should be carried out by the manufacturer or
an approved representative to avoid safety
hazards .
NOTE
► Replacement parts not listed (such as carbon
brushes, switches) can be ordered via our
service hotline .
has a variable speed
lightly
towards the left or
regularly:
backwards
with the help
.
GB │ MT │ 43 ■