Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions – LDA3B /LDA3BCP Commercial Recessed Adjustable LED
Figure 1.
Catalog Number
LDA3B*/LDA3BCP*
LDA3B*/LDA3BCP*
LDA3B*/LDA3BCP*
INSTALLATION
Rough-In Section
1.
Fixture Attachment Method: Install fixture into ceiling
cavity using 1/2˝ electrical conduit. Use 3/4˝ channel,
1-1/2˝ channel, 1/8˝ x 1/2˝ bar stock, or T-bar fasteners
as mounting rails (furnished by others) by inserting
them through hanger brackets at both sides.
2.
Hanger bar bracket should be adjusted as needed
(screws, see Figure 2).
3.
For situations where the housing lid is accessible after
housing installation, see Figure 3 for removal.
2
PORTFOLIO
IB520076ML
Approximate
Aperture
Ceiling Cutout
3.5"
4.375"
3.5"
4.375"
3.5"
4.375"
Installation instructions
Fixture
Lumens
Height
5.41"
250, 700, 1000, 1300
6.76"
1800
6.76"
2300
Hanger Bar
Adjustment Screws
Figure 2
To Remove Lid, Loosen
And Remove Screws (4X)
Figure 3
Plenum Type
IC
IC
Non IC
Publicidad
Tabla de contenido
