Safety Symbols - EGO CH7000 Manual De Operaciones

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger. The
instructions and warnings they give are no substitutes for proper accident prevention
measures.
WARNING:
Operator's Manual, including all safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to following all instructions listed below
may result in electric shock, fire, and/or serious personal injury.
for use over eyeglasses or standard safety glasses with side shields. Always use eye
protection which is marked to comply with ANSI Z87.1.
4
56V CHARGER — CH7000/CH7000-FC
Be sure to read and understand all safety instructions in this
WARNING:
foreign objects being thrown into your eyes, which can result in
severe eye damage. Before beginning power tool operation, always
wear safety goggles or safety glasses with side shields and a full
face shield when needed. We recommend a Wide Vision Safety Mask
The operation of any power tools can result in