Adjust The Swing Away Legrest; Adjust The Elevating Legrest; Install/Remove The 30Cm Wheels - ARDEA ONE CP100 Serie Manual De Instrucciones

8

8.5 Adjust the swing away legrest

(FIG.6)
8.6 Adjust the elevating legrest (OPTIONAL)
8.7 Install/remove the 30cm wheels (only for NEXT, DUAL and SKINNY)
Place the caster into the hole on the wheelchair frame
Only for wheels with fixed axle (only for SKINNY)
• Place the small wheel and block it with the nut
• To remove the wheel, unscrew the nut and remove the small wheel
• To adjust the length of the footrest, unlock
the safety lever at the bottom on the left side,
then press the push button, slide the tube until
the desired hole, then relock
the safety lever.
• To adjust the length of the footrest, unlock
the safety lever at the bottom on the left side,
then press the push button, slide the tube until
the desired hole, then relock the safety lever.
(Fig.7) (Rif.P)
• Adjust the legrest height by pushing the
lever
at the desired height
(FIG.7)
ù
Only for quick release wheels
• Remove the plastic cap and
push the wheel until it locks
into the place
• Remove the wheels: push the button
on the centre of the wheel, and extract
the wheel
(FIG.8)
(FIG.6)
(Fig.7) (Rif.L), and release to lock
(FIG.8)
(FIG.8)