Maintenance And Troubleshooting; Operating Position - Liberty Pumps 2448 Serie Manual De Instalación

Ocultar thumbs Ver también para 2448 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENSURE THAT
GROMMET IS
PROPERLY
INSTALLED
DISCONNECTED POSITION

4. Maintenance and Troubleshooting

IMPORTANT: The grinder pump and control panel are supplied with their own separate Installation/Operation/Maintenance manuals.
Ensure that you have received these manuals, and that you read and understand them prior to installing this unit. Your familiarity with
the grinder pump manual and the control panel manual is critical. Please follow the Maintenance and Troubleshooting procedures
provided in those manuals
3 Year Limited Warranty
and workmanship for a period of 3 years from the date of purchase. The date of purchase shall be determined by a dated sales receipt
noting the model and serial number of the pump. The dated sales receipt must accompany the returned pump if the date of return is
more than 3 years from the "CODE" (date of manufacture) number noted on the pump nameplate. The manufacturer's obligation under
this Warranty shall be limited to the repair or replacement of any parts found by the manufacturer to be defective, provided the part or
assembly is returned freight prepaid to the manufacturer or its authorized service center, and provided that none of the following
warranty-voiding characteristics are evident: The manufacturer shall not be liable under this Warranty if the product has not been
properly installed; if it has been disassembled, modified, abused or tampered with; if the electrical cord has been damaged or
improperly spliced; if the pump discharge has been reduced in size; if the pump has been used in hot water or water containing sand,
lime, cement, gravel or other abrasives; if the product has been used to pump chemicals or hydrocarbons; if a non-submersible motor
has been subjected to excessive moisture; or if the label bearing the serial and code number has been removed. Liberty Pumps, Inc.
shall not be liable for any loss, damage or expenses resulting from installation or use of its products, or for consequential damages,
including costs of removal, reinstallation or transportation. There is no other express warranty. All implied warranties, including
those of merchantability and fitness for a particular purpose, are limited to three years from the date of purchase. This
Warranty contains the exclusive remedy of the purchaser, and, where permitted, liability for consequential or incidental damages under
any and all warranties are excluded.
Liberty Pumps, Inc. warrants that pumps of its manufacture are free from all factory defects in material
©Copyright 2015 Liberty Pumps Inc. All rights reserved
ENSURE THAT RUBBER
GROMMET IS PROPERLY
INSTALLED HERE.
INSTALL 3/8-16 HEX BOLTS
HERE. EVENLY TIGHTEN
BOTH SIDES SO THAT
GASKET IS PROPERLY
SQUEEZED.

OPERATING POSITION

4

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

2448lsg202Lsg202mLsgx202m

Tabla de contenido