Preparation; Assembly Or Installation Instructions - ED 1656MR-22-241 Manual De Instrucciones

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Installation Time: 10 minutes.
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors.
Helpful Tools (not included): Measuring tape, level
INSTALLATION INSTRUCTIONS
1. Measure the distance between the holes in the
mounting hangers (B) on the back of the mirror (A).
2. Measure and mark location for mounting hardware on
the wall using the measurement from Step 1. Make
sure the marks are level and located at the desired
height.
Note: Make sure to allow height clearance along the
bottom of the mirror for your faucet if necessary.
1
B
2
6
B
A