Electrical Requirements; Leveling The Unit - mabe RMC090NESY0 Instructivo

electrical requirements

Warnings:
• Do not remove grounding prong.
• Do not use a plug adapter.
• Do not use extension cords.failure to follow these instruc-
sure you have the proper power supply.
•
A 230 Volt /50 Hz AC only 10
ampere fused and properly
grounded power supply is
required.
•
It is recommended that a
separate circuit serving only this
appliance is provided.
•
Use a receptacle which cannot
pull chain.
•
Do not use an extension cord.

leveling the unit

If the refrigerator is not leveled during
installation. The doors may not close or
seal properly, causing cooling, frost, or
moisture problems. It is very important
for the refrigerator to be levelled in
order to function properly.To level
your refrigerator, turn the leveling leg
clockwise to raise that side to the
refrigerator or turn it counter clockwi-
se to lower that side.
note: Before performing any
installation or cleaning job, or
removing a light bulb, turn the
refrigerator control to and
then disconnect the refrigera-
tor from the electrical source.
connect the refrigerator to the
electrical source and reset the
control to the desired setting.
note: Having someone push
against the top of the
refrigerator take some weight
makes it easier to adjust the
leveling legs.
21