Important Safety Information - NORTH STATES 5150 Instrucciones

IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS
CAREFULLY AND KEEP FOR FUTURE REFERENCE

Important Safety Information

• Do not use the product if any components are broken or missing. If parts are required please contact our
Customer Service Department (contact information on the first page). Do not use replacement parts other
than those approved by the manufacture or distributor. Non approved spare parts may render the repair or
the product unsafe.
• If the safety gate is to be installed at the top of the staircase, it must be no lower than the level of the top step
in order to prevent a child from falling down the stairs.
• If the safety gate is to be installed at the bottom of a staircase, it must be no higher than the bottom step in
order to prevent a child from climbing the stairs.
• Check regularly that all fittings and components are secure and no components are worn, broken or missing.
• Check regularly that all fittings are securely tightened and that the locking mechanism is working properly.
• Any damage to property during installation of your safety gate is the sole responsibility of the end user.
• We recommend that you carry out the installation away from small children as some components may
present a choking hazard when loose.
WARNING
!
• Children have died or been seriously injured when gates are not securely installed. ALWAYS
install and use gates as directed using all required parts.
• STOP using when a child can climb over or dislodge the gate.
• Install only with locking/latching mechanism securely engaged.
• NEVER use to keep child away from pool.
• This product will not necessarily prevent all accidents.
• NEVER leave child unattended.
• Periodically check all fasteners to be sure they are tight and secure, stop using gate if any parts
are missing or become damaged.
• Hardware is included for use in solid materials only, such as wood or metal.
Your safety gate contains the following:
x1
B
A
D
x2
J
K
C
G
E
H
F
M
L
x8
I
Order replacement
parts at
www.northstatesind.com
A. Upper Hinge Holder
B. Lower Hinge Holder
C. Upper Latch with Gate Stop
D. Lower Latch with Gate Stop
E. Upper Hinge Spindle
F. Lower Hinge Spindle
G. Wrench
H. Template
I. Screws
J. Upper Assembly Fitting
K. Lower Assembly Fitting
L. Latch Spindle
M. Gate frame
Tools needed:
(not included)
Page 2