MAURER KITHNOS Manual De Instrucciones página 12

KITHNOS – cod. 51568
If the appliance is out of work switch it off without tampering it. If any repair is required
please contact only the after-sale centres approved by the manufacturer and ask for
original spare parts. Otherwise safety of the appliance can be compromised.
1- This appliance is not intended for use by persons (including children)with reduced
physical ,sensory or mental capabilities ,or lack of experience and knowledge , unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
2- If the supply cord is damaged ,it must be replaced by the manufacture ,its service
agent or similarly qualified persons in order to avoid a hazard.
3- The instructions for heaters marked. " DO NOT COVER " or with the " DO NOT
COVER " symbol shall contain the substance of the following :WARNING :in order to
avoid overheating ,do not cover the heater.
4-The instructions shall state that the heater must not be located immediately below
a socket outlet.
5- Do not use this heater in the immediate surroundings of a bath ,a shower or a
swimming pool
This heater is filled with a precise quantity of special oil . 6 Repairs requiring opening
of the oil container are only to be made by the manufacturer or his service agent
who should be contacted if there is an oil leak; When scrapping the heater ,follow
the regulations concerning the disposal of oil.
4. OPERATION
Warning: Plug in the appliance. Check that the outlet has at least a 10 AMPERE
current carrying capacity.
Fitting the wheels (see Diagram for guidance)
1. Turn the radiator upside down and rest on a soft surface to prevent scratching the
radiator housing.
2. Screw the wheel plate onto the radiator, using the wire loops and wing nuts provided.
3. Push the castor wheels onto the wheel pins on the plate until they "click" into place.
4. Turn the radiator back to its correct upright position.
OPERATION
1. Turn the thermostat (B) to the highest setting and switch on the two power buttons (C).
When the desired temperature has been reached, turn back the thermostat until the
indicator lamp goes out.
2. Simply adjust the thermostat to retain the desired temperature.
3. The indicator lamp indicates whether or not the radiator is working.
If your heater fails to operate:
1. Be sure that the unit is plugged into the power supply and that the electrical outlet is in
working order.
2. If the heater fails to Operate too, return the heater to an authorized company.
MAINTENANCE
The appliance needs only an external regular cleaning. After use and before cleaning
always unplug the appliance and wait till the item is cool. Clean the grilles from dust.
Do not clean the painted with emery flour or solvents and use only a moistened cloth.
GUARANTEE
This item is warranted for two years against faulty material or workmanship, provided the
purchase date, shall be proven by any official selling document.
12