Starting The Machine - sunjoe iON8PS2-LT Manual Del Operador

Fig. 16
green
red
Charging
NOTE: If the top light remains green while the bottom light
alternately flashes red and green, this indicates a temperature
abnormality (i.e. that the battery pack is either too hot or too
cold). If there is only a red blinking light, this indicates that
something is wrong with the battery. Contact Snow Joe
Sun Joe customer service at 1-866-SNOWJOE
®
(1-866-766-9563).
Green
Flashing red/green
Temperature abnormal
5. A fully discharged pack with an internal temperature in
the normal range will fully charge in 2 hours (between
32ºF/0ºC and 113ºF/45ºC). Heavily cycled battery packs
may take longer to charge completely.
6. If the charging light indicator alternately blinks red and
green or the light indicator does not come on at all,
check that the battery pack is fully seated into the bay.
Remove the pack and reinsert. If the problem persists,
contact an authorized Snow Joe
call the Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563) for assistance.
7. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger (Fig. 17).
green
green
Fully charged
+
®
Flashing red only
Something is wrong
+ Sun Joe dealer or
® ®
customer service center at
®
Fig. 17
Push lock button
8. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the battery.
Charging a Hot or Cold Battery Pack
A red and green flashing indicator light on the charger indicates
that the battery pack temperature is outside the charging
range. Once the pack is within the acceptable range, normal
charging will take place and the red light will be continuous.
Hot or cold battery packs may take longer to charge.
Lithium-Ion Charging Status
Battery Pack Red Charger
Temperature Indicator Light
Too hot Flashing
Normal range Continuous
Too cold Flashing
Operation

Starting the Machine

1. Insert the battery in its housing (Fig. 18).
Fig. 18
14
Charging
Status
Not charging
Normal charging
Not charging
Battery