Preventative Maintenance - Indoor Cycling TOMAHAWK E Serie Manual Del Usuario

PREVENTATIVE MAINTENANCE

Regular maintenance must be performed on the TOMAHAWK E-Series for optimal
performance and longevity. Please read and follow all instructions below. If the
TOMAHAWK E-Series is not maintained as described, components may wear excessively
and the TOMAHAWK E-Series may become damaged. Improper maintenance will void the
warranty terms. If you have questions about maintenance, contact your local
distributor or refer to www.indoorcycling.com
Note: Many maintenance procedures require lubricant spray. Manufacturer
recommends for example Brunox or a similar solvent- and acid free lubricant.
Daily maintenance:
1. Make sure that the TOMAHAWK E-Series is level. If the TOMAHAWK E-Series rocks
on your fl oor, turn the levelling feet underneath the front or rear stabilizer until the rocking
motion is eliminated (see HOW TO MOVE THE TOMAHAWK E-Series on page 12).
2. After each user fi nishes exercising, the TOMAHAWK E-Series should be disinfected and
cleaned to maintain a hygienic environment. First, apply a disinfectant spray to the handle-
bars and the saddle. Using a lint-free cloth, dry the handlebars and the saddle. Next, apply
a small amount of disinfectant to a lint-free cloth and clean the adjustment knobs and the
adjustment handles. Avoid using strong detergents on the TOMAHAWK E-Series frame.
Weekly maintenance:
1. Apply a small amount of the lubrication spray to a lint-free cloth, and thoroughly clean
the frame, the handlebar slider and seat sliders the fl ywheel and the plastic parts of the
TOMAHAWK E-Series.
2. For optimal performance of the resistance
2
system, and to minimize wear on the brake pad,
the
acid-, silicone- and solvent free spray lubricant
should be applied to the brake pad using the lubri-
cation holes on the plastic part of the brake pad. If
fuzz or lint appears on the brake pad, the brake pad
has become too dry-lubricant spray should be ap-
plied more frequently. Make sure brake pad is tho-
roughly soaked from end to end with lubricant spray.
Then, wipe the excess off.
Version 1.0 2013 IC-TKEB-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com ENG 13