CLEANING INSTRUCTIONS
1. Remove the Attachments from the Mixing Lid by simply pulling downward
on them. CAUTION! If using the 3 Blade Attachment the Blades are Very
Sharp!
2. Cleaning the Mixer should be done immediately after use to prevent food
from drying on the parts. The Mixer should be washed by hand in warm
soapy water, rinsed, then dried immediately. Never use harsh abrasives or
pads to clean the Manual Kitchen Kit.
3. The Mixer can be washed in the top rack of a dishwasher. Carefully
position these pieces where they won't cut or damage other utensils.
CAUTION: Once the 3 Blade Attachment is removed, DO NOT immerse it in
water! Blades should be washed either in a top rack of the dishwasher or by
holding onto the plastic portion of the Blade. With a soapy towel, wipe AWAY
from the Blade edges. To rinse Blade, hold by the Handle and wipe with a
clean, damp towel, or hold under running water. Dry thoroughly.
4. Store the 3 Blade Attachment inside the Mixing Container. It is safest to
place the cardboard blade covers back onto the blades before storage. Return
the Mixer and all parts to the original box. Store in a cool, dry area. BE
SURE TO STORE OUT OF REACH OF CHILDREN!
NOTE:
the weight of the filler might be too much for the Handle to bear. It is
always best to hold the Handle and place one hand under the Mixing
Container for support when carrying or pouring.
CAUTION SHARP!
When filling the Mixing Container to the maximum capacity,
WARNING
SHARP BLADES!
Protective/cut-resistant
gloves are
recommended
whenever handling the
3 Blade Attachment!
7