KALLISTA P22107 Guia De Instalacion página 6

Bracket
Assembly
Hose
Outlet
Hose Outlet on
Bath Faucet
2. Install the Handshower
Insert the washer into the nut of the bracket assembly.
Wrench tighten the nut of the bracket assembly to the hose outlet
on the bath faucet.
Secure the female hose end to the hose outlet on the bracket
assembly.
Secure the male hose end to the handshower.
Place the handshower on the cradle.
3. Installation Checkout
Ensure that all connections are watertight.
Open the drain.
Open the main water supply and check for leaks. Repair as
necessary.
Open both hot and cold valves and run water through the spout
for one minute to remove debris.
Activate the handshower. Check for leaks at the flexible hose and
handshower hose connections.
Close the valves.
1019831-2-B
Cradle
Nut Female
Hose End
Washer
6
Male
Hose End
Kallista