Hose; Powered Hand Tool; How To Clean - Hoover WINDTUNNEL T Serie Manual Del Propietário

hose

: how to Clean

CAUTION
!
To reduce the risk of injury from moving parts, unplug vacuum before servicing.
4.15 To remove Hose for tool use, press the Hose Release Button (A) and pull
Hose end out.
Clear away debris or obstructions from Hose. Do not use sharp objects to clean
out hose as they can cause damage. To lock back into place, push Hose into
Hose Tube until you hear a click.

powered hand tool:

CAUTION
!
To reduce the risk of injury from moving parts,
unplug vacuum before servicing.
4.16 Turn tool so bottom faces up. Rotate the
latches (A) on either side of tool.
4.17 Remove bottom plate (B).
4.18 Remove any debris and/ or hair from brushroll.
Replace bottom plate by aligning tabs along front
edge of tool. Rotate latches back into locked position.
All manuals and user guides at all-guides.com
!
how to Clean
4.16
A
!
11
4.15
A
4.17
b
4.18