Tabla de contenido
Publicidad
Installing the secondary memory module
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the secondary and provides a visual representation of the installation procedure.
Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot and press the memory module until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Install the
base
cover.
2. Install the
SD
card.
3. Follow the procedure in
la tarjeta SIM
Removing the SIM card
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
About this task
The figure indicates the location of the SIM card and provides a visual representation of the removal procedure.
32
Desmontaje y reensamblaje
after working inside your
computer.
before working inside your
computer.
Publicidad
Tabla de contenido
