Mounting And Installation; Rack Installation; Standalone Installation; Powering The Hub - Tripp-Lite U280-016-RMINT El Manual Del Propietario

Mounting and Installation

The U280-016-RMINT/U280-032-RMINT can be mounted with any 2- or 4-post rack with an
available 2U space or placed on any flat surface. Mounting hardware and four rubber feet are
included for easy mounting or placement.

Rack Installation

Secure the mounting ears to the unit using the
included hardware. Then attach the USB
charger/hub to the rack by inserting four user-
supplied screws through the mounting brackets
and into the mounting holes of the rack rail.

Standalone Installation

The USB charger/hub can be placed on any
level surface that can safely support its weight
plus the weight of the attached cables. When
installing on a desktop or other flat surface,
remove the backing material from the rubber
feet and affix them to the bottom panel at the
corners.

Powering the Hub

Insert the included power cord into the C14
inlet on the rear of the unit, then plug into a
power outlet.
16-02-306-9335A1.indb 4
U280-032-RMINT Shown
U280-032-RMINT Shown
C13 to BS 1363
(UK)
4
C13 to CEE 7/7
(Schuko)
4/1/2016 12:21:49 PM