Switch Between Modes; Switch Between Mode Options; Change Setting Values; Use The Hi-Glo Backlight - Oregon Scientific OUTBREAKER RX109 Serie Manual De Usuario

The watch will show Cxxx, Rxxx or Sxxx whenever either the
bike mount, cadence or speed sensor batteries are low.
NOTE
Replace all the batteries at the same time – it is
dangerous to mix old and new batteries.
NOTE
Used batteries can be harmful to the environment, and
should not be thrown out with household rubbish. Contact your
local waste disposal authority for instructions on how to dispose
of used batteries. Protect the environment by taking exhausted
batteries to authorized disposal stations.

SWITCH BETWEEN MODES

Press the MODE button to switch between the Modes: CLOCK,
ALTI-BARO, CARDIO (RS109/RP109 only), BIKE (RP109
only), and PC. A bar shows next to the appropriate Mode (on
the outer ring of the LCD display) when it is selected.

SWITCH BETWEEN MODE OPTIONS

Press SELECT/+ to switch between the options within a Mode.

CHANGE SETTING VALUES

Press and hold FUNC/SET for 2 seconds to enter setting mode.
Then, press ST/SP/- or SELECT/+ to change the value. Press
FUNC/SET to switch between options, and to confirm the
changes when you are done.
RX109-English.P65
All manuals and user guides at all-guides.com

USE THE HI-GLO BACKLIGHT

Press light/key to turn on the HI-GLO backlight on for five
seconds. Once the light is on, press any key to keep it on for a
further five seconds.
In order to save power the light will not work when the battery
is low. If this happens, change the battery as soon as possible.

KEY LOCK

The watch also has a key lock function to stop the buttons from
being accidentally pressed during an activity. To activate it
simply press and hold light/key until a small key icon appears
in the right hand corner of the screen. The function keys are now
useless. To reactivate them, press and hold light/key again
until the key icon disappears.
NOTE
Pressing any key while in Key lock will stop the alarm.

HANDLING THE PRODUCT

The watch is designed to withstand a wide range of sports
activities, and comes complete with a strong wristband. When
riding (RP109 only), make sure the watch is firmly connected to
the bike mount, and connect all bicycle equipment carefully and
securely. See the BIKE Mode section ( 20) for instructions.
8
8
The alarm will still go off while the Key Lock is activated.
2004.9.2, 3:08 PM