EMKO ESM-3723 Serie Manual De Instrucciones página 14

5.4 Entering To The Programming Mode, Changing and Saving Parameter
Main Operation Screen
O1
When SET button is pressed for 3
seconds, "P" led turn. If programming
mode entering password is different
from 0, programming mode entering
screen will be observed.
Password Entering Screen
O1
Enter programming mode accessing
password with increment and
decrement buttons.
Note2: If programming mode accessing password is 0, only three parameters are accessible, and the
parameter values can be changed.
Programming Screen
O1
Press SET button for accessing to the
parameter value. Press increment
button for accessing to the next
parameter, press decrement button for
accessing to the previous parameter.
Temperature Unit Selection
Parameter Value
O1
Press set button for saving the
parameter.
i
If no operation is performed in programming mode for 20 seconds, device turns to main
operation screen automatically.
ESM-3723
SET
ü
Note1: If programming
mode accessing password
is 0, Temperature Unit
screen is observed
instead of programming
screen
ESM-3723
SET
ü
ESM-3723
SET
ü
ESM-3723
SET
ü
O1
Programming Mode
Entering Screen
Press SET button for
accessing to the
password entering
Password Entering Screen
O1
Press SET/OK button for
entering the password.
Temperature Unit Selection
Parameter Value
O1
Change the value with increment
and decrement buttons.
Decimal Separator Enabling
Selection Screen
O1
Press increment button for accessing to
the next parameter, press decrement
button for accessing to the previous
parameter.
ESM-3723
SET
ü
ESM-3723
SET
ü
ESM-3723
SET
ü
ESM-3723
SET
ü
14