EMKO ESM-3723 Serie Manual De Instrucciones página 7

4.Front Panel Definition and Accessing to the Menus
1
2
BUTTON DEFINITIONS
1. Increment Button :
** In main operation screen, press this button to change display temperature and humidity sensor
value.
** It is used to increase the value in the Temperature and Humidity Set screens and Programming mode.
2. Decrement, Silencing Buzzer Button :
** It is used to decrease the value in the Set screen and Programming mode.
** It is used to silence the buzzer.
3. Set Button:
** In the main operation screen; if this button pressed for the first time, Temperature set value will be
displayed. Value can be changed using increment and decrement buttons. When Enter button is
pressed again, value is saved and Humidty set value will be displayed next. Value can be changed using
increment and decrement buttons. When Enter button pressed again, value is saved and returns back
to main operating screen.
4.Enter Button:
** To access the programming screen; in the main operation screen, press and hold this button for 5
seconds.
** It is used to save value in the Set screens (Temperature or Humidity) and programming screen.
LED DEFINITIONS
5.A1 led :
** It is active when Temperature alarm statuses.
6. O1 Led :
** This led indicates that heating output is active.
7.Celcius led :
** Indicates that device is in C mode.
8.Fahrenheit led :
** Indicates that device is in F mode.
9. O2 Led :
** This led indicates that
10.A2 Led :
** This led indicates that Humidifier
11.Precent Sign ledi :
** Indicates that device is in Humidity Set screen or Humidifier
12.Program led :
** Indicates that device is in programming mode .
5 6
O1
A1
O2
A2
9 10
o
o
Humidifier output is active.
Alarm is active.
7 8
ESM-3723
O
C
3
SET
O
F
P
ü
4
11 12
output is active .
7